Richard

About Richard

This author has not yet filled in any details.
So far Richard has created 211 entries.

HSD ES915 3.8KW 5HP Long Nose

HSD ES915 Long Nose

                                                       

Dual Voltage: 220 / 380V
Power: 5 HP, 3.8 KW                                                       
Speed: 24,000 RPM
Tool Holder: ISO 30                                                               

                                          

                                                                                  

HSD ES929 ISO30

HSD ES929  HSD ES929

New HSD ES929 In Stock
Long Nose and short nose versions in stock.
These spindles can be fitted to Masterwood, Homag ,Weeke and other modern CNC machining centres.
Fan Cooled or Air Cooled
ISO30 and HSK63F Tool Clamping
Rear Mounted
We can also offer a rapid rebuild service, bringing the spindles back to manufacture specification.

Omlat Spindle Rebuild water cooled spindles

       

We offer full rebuild services for the Omlat range of water cooled spindles. These spindles are used on the following CNC machines –

Homag
Weeke
Holzher

We can cater for all of the frame sizes. The rebuild incorporates the best quality high precision ceramic bearings. We use the latest in dynamic balancing technology.

We don’t just rebuild the spindles. We can deal with tool release issues, damaged release mechanisms and gripper assemblies.

Spindles are run in using dedicated spindle specific test simulators.

Zeichng Number – E13770M        Serial Number – 18107H05

Zeichng Number – 06656              Serial Number – 043234

Zeichng Number –  06724200       Teile Number – 2-017-95-2721

Zeichng Number – 06656200       Serial Number – 071418

 

ELTE TMPE5 7.0 kW

 

       

ELTE Spindle TIPO – TMPE5

380 V

7.0 Kw

Dimensions 380x120x180

Rear Mounted

       

 

   

Homag Spindle Repair

We can offer repair and rebuild services on all types of spindles used on Homag and Weeke CNC machinery.

We carry out full ceramic rebuilds. Dynamic balancing. Tool holder clamp force. Tool clamp gripper adjustment. Sensor reset. Pressure testing.

We also have site engineers to remove and refit spindles.

  

 

 

 

CNC Router MG3020 new CNC controller

3 Axis MG3020CNC Router
Multi head
New CNC controller
 
    

This machine is now sold

MG3020 CNC router, 3 axis CNC router with moving gantry and fixed table.
New  CNC  system using Num MMI operator interface on Windows XP. This is a dedicated modern CNC controller with high speed contouring functions.
Machine can be offered with this spec or with new CNC controller and automatic toolchanging.

     

X axis travel                          3050mm
Y axis travel                          2000mm
Z axis travel                          180mm
Table size                             3050×1550mm
Table working height                          920mm
Feed rates             X axis     0-15m/min           

                                Y axis     0-15m/min
Rapid                    X, Y axes                20m/min               

The machine is fitted with two HT5 router spindles on adjustable centres. These units run at 18000rpm. Tool shank sizes between 3mm and 25mm can be used. Spare spindles and rebuilds are readily available.
The machine is also fitted with a six spindle multi borer. Drills are 10mm shank.

 The spindles are inverter driven and therefore have fully variable speeds. Both spindles can be run at the same time or individually.

Vacuum table fitted with twin port system with M code control and safety equipment
140 cu m/hr vacuum pump split vac system.

The machine complies with PUWER 98
Full accoustic safety enclosure

Brushless servo drives, digital inverter. Spindle speeds fully programmable up to 18000rpm.

Suitable for composites, aluminium, wood and plastics.

 

 

 

CNC Router Pattern Making

Our CNC Routers can be used for pattern making. We supply machines of either 5 axis or 3 axis configuration for this application. Many components can be created using 3 axis machines. We can supply machines with extra capacity Z axis travel giving a very tall machining envelope. Couple this physical capability with one of our high speed digital CNC controllers and you have the ideal patternmaking CNC router.

We can supply CadCam systems with 3 and 5 axis capability. Extremely large part programs can be created but are easily handled by our latest CNC control products.

 

SCM Prisma 5 axis CNC machine spindle repair

SCM Prisma 5 axis CNC machine spindle. Complete rebuild, ceramic bearings, dynamic balance.

Surplus CNC machinery bought

CNC Support Ltd will purchase your existing CNC Machinery. We are always looking for good, well engineered CNC Routers and machining Centres.

We can give a valuation on your CNC machine. Usually based on digital images. Once a decision is made we will pay for the machine and arrange quick ,safe and efficient removal from your premises.

  

 

Uncategorised|0 Comments

Aerospace Applications

We are CNC machinery and automation engineers.

CNC Support Ltd can supply 3 and 5 axis CNC machinery for use in the Aerospace Industry. We can provide servicing , breakdown call out and re engineering to the high standards expected in this industry.

All of our engineers have come from engineering apprenticeships. This basic essential background has further been extended by additional technical qualifications. Our staff understand your machinery and service requirements.

We pride ourselves on our reputation. A large part of our business comes from recommendations. We respond to your service requirements promptly and efficiently.

Uncategorised|0 Comments